Pro-Ject 1 Xpression III Classic
    Pro-Ject 1 Xpression III Classic
    Pro-Ject 1 Xpression III Classic

    Pro-Ject 1 Xpression III Classic

    Disponible 1-4 jours
    891,00 CHF
    Bonne platine avec arrêt automatique et plateau en aluminium. Moteur permettant la lecture des 33 et 45 tours, avec commutation électronique. Livrée avec une cellule  Ortofon 2M Red montée.



    Available finishes. Mahogany or olive veneer and piano-lacquered black

    A quiet running AC motor with a two-step pulley drives the hub and platter via a flat-ground belt.

    The medium density fibre plinth stands on three height-adjustable rubber-damped aluminium cones.

    The motor is decoupled from the plinth to reduce vibration transmission.

    The resonance-optimised platter is a sandwich construction utilising the hub, a fine-balanced aluminium platter and a cork mat (a standard felt mat is supplied also).

    The platter's low-tolerance chrome-plated stainless-steel axle runs on a polished ball bearing in a brass bearing housing.

    Connection to the phono input of the amplifier can be made with connecting cables of your taste through the gold plated phono sockets and earth screw. A standard cable is provided.

    External power supply avoids potential electro-mechanical interference.

    Tonearm 8.6c

    As an optional extra, the turntable is supplied with Ortofon 2M Red MM-cartridge fitted.

    Conical carbon-fibre armtube avoids standing wave reflections.

    Low mass aluminium headshell securely glued to armtube.

    The inverted bearings consist of four hardened stainless steel points bearing in sapphire cushes.

    Flexible counterweight shaft avoids vibration at undesirable frequencies.

    Solid armbase permits accurate height adjustment of armtube and VTA (vertical tracing angle).

    The counterweight supplied is suitable for cartridges weighing between 7 - 12g . An alternative counterweight for cartridges weighing between 4 - 7g is available as an accessory part.

    Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell.

    Silicone-damped armlift can be adjusted to suit working height of the arm.

    The internal wiring consists of flexible high-purity copper from the headshell right through to the gold-plated phono sockets.

    Technical data: Pro-Ject 1 Xpression III Classic

    • Fitted cartridge Ortofon 2M Red
    • Amplifier connection    MM-input
    • Nominal speeds    33 / 45 / 78 r.p.m. (78 optional)
    • Dust cover    yes
    • RCA phono sockets    yes
    • Rubber-damped aluminium cones    yes
    • Tonearm    Pro-Ject 8.6c
    • Tonearm with fibre armtube and sapphire thrust-pads    yes
    • Effective tonearm length    8,6 " (218,5mm)
    • Effective tonearm mass    8,7g
    • Overhang    18,5mm
    • Supplied counterweight    cartridge weight 7 - 12g
    • Optional counterweight    cartridge weight 4 - 7g
    • Downforce range    10 - 30mN
    • Speed variance    ±0,5 %
    • Wow and flutter    ±0,1 %
    • Signal to noise    -70dB
    • Platter weight/diameter    1,65kg/300mm
    • Power supply type    Mains-fed outboard power supply
    • 220 - 240V, 50 cycles or 100 - 110V, 60 cycles
    • Output voltage    16V/500mA AC
    • Power consumption    10W
    • Dimensions (lid open)    415 x 370 x 405mm
    • Dimensions (lid closed)    415 x 118 x 320mm
    • Weight    5,5kg

    Détails du produit

    En poursuivant votre navigation, vous acceptez l'utilisation de cookies sur ce site.