Mon panierIl n'y a plus d'articles dans votre panier
Pro-Ject 2Xperience Acryl Platine avec bras 9cc et cellule Ortofon 2M Red / Acrylique
La 2-Xperience est une excellente platine avec bras haut en fibre de carbone 9cc. Plateau en acrylique avec pieds magnétiques. Le moteur permettant la lecture des 33 et 45 tours, avec commutation manuelle. Livrée avec une cellule Ortofon 2M Red montée.
Available finishe: Acryl
A quiet running AC motor with a two-step pulley drives the platter's outside edge via a belt.
The transparent acrylic plinth stands on three height-adjustable Sorbothane®-damped aluminium cones.
The motor is decoupled from the plinth to reduce vibration transmission.
The resonance-optimised platter is a sandwich construction utilising the hub, a fine-balanced medium density fibre platter weighing 2Kg, a 4mm thick flat-ground layer of vinyl and a screw-down metal record clamp.
The platter's low-tolerance chrome-plated stainless-steel axle runs on a Teflon bearing plate in a sintered bronze bearing housing.
Connection to the phono input of the amplifier can be made with connecting cables of your taste through the gold plated phono sockets and earth screw. A standard cable is provided.
External power supply avoids potential electro-mechanical interference.
As an optional extra, the turntable is supplied with Ortofon 2M Red MM-cartridge fitted.
The headshell and armtube are fashioned from a single piece of carbon-fibre.
Conical armtube avoids standing wave reflections.
Inverted tonearm bearing comprises four hardened stainless tips in ABEC7 spec ballraces.
Rings provide very solid arm bearing housings. The outside ring is open to avoid resonances.
Design of counterweight effectively counteracts unwanted resonances.
The counterweight supplied is suitable for cartridges weighing between 6 - 10g. Alternative counterweights for cartridges weighing between 11 - 15g, 8 - 11g or 5 - 8g are available as an accessory part.
Counterweight shaft lowered to record level reduces cantilever forces and dynamic wow when playing warped records.
Solid armbase permits accurate height adjustment of armtube and VTA (vertical tracing angle).
Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell.
Silicone-damped armlift can be adjusted to suit working height of the arm.
The internal wiring consists of flexible high-purity copper from the headshell right through to the gold-plated phono sockets.
Technical data: Pro-Ject 2 Xperience Classic
- Fitted cartridge Ortofon 2M Red
- Nominal speeds 33 / 45 r.p.m.
- Dust cover yes
- Record clamp yes
- Supplied Pro-Ject phono cable standard cable
- RCA phono sockets yes
- Sorbothane-damped aluminium cones yes
- Tonearm Pro-Ject 9cc
- Tonearm with fibre armtube and sapphire thrust-pads yes
- Effective tonearm length 9 " (230mm)
- Effective tonearm mass 8,5g
- Overhang 18mm
- Supplied counterweight cartridge weight 6 - 10g
- Optional counterweights cartridge weights 11 - 15g, 8 - 11g, 5 - 8g
- Downforce range 10 - 30mN
- Speed variance ±0,5 %
- Wow and flutter ±0,08 %
- Signal to noise -70dB
- Platter weight/diameter 2kg/300mm
- Power supply type Mains-fed outboard power supply
- 220 - 240V, 50 cycles or 100 - 110V, 60 cycles
- Output voltage 16V/500mA AC
- Power consumption 2W
- Dimensions (lid open) 460 x 390 x 460mm
- Dimensions (lid closed) 460 x 133 x 360mm
- Weight with 7,7kg