Doepfer A-114
CHF 69
Sur commande
Payer facilement avec :
Doepfer A-114
Module A-114 contains two separate ring modulators.
A ring modulator outputs the product (Multiplication X Y) of the signals at inputs X and Y. It’s similar to a VCA, but whereas a VCA only responds to positive voltages at the inputs (2-quadrant multiplication), the ring modulator responds to both positive and negative voltages (4-quadrant multiplication).
The ring modulator thus provides a refinement of amplitude modulation (AM). Ordinary amplitude modulation will output the original carrier frequency fC as well as the two side bands (fC – fM, fC fM) for each of the spectral components of the carrier and modulation signals – but ring modulation cancels out the carrier frequencies, and just lets the side-bands pass to the output (see Fig. 1).
A ring modulator is used for the production of bell-like sounds, alien voices, or just to produce new timbres.
40 mA 12V 40 mA -12V 0 mA 5V 40 mm Depth
Informations
Produits qui pourraient vous intéresser :
-
2 HP Nse
2 HP Nse Nse is a white noise generator.
CHF 165Sur commande -
2 HP Osc
Osc is a voltage controlled, analog oscillator with an extremely wide frequency range.
CHF 165Sur commande -
2 HP VCO
VCO is an analog voltage controlled oscillator based on the reissue of the legendary Curtis CEM3340 IC.
CHF 89En stock -
2HP Sine
2HP Sine Sine is a harmonically pure VCO with two distinct outputs. The primary output contains a perfect sine wave with a wide frequency range and pristine volt per octave tracking. The Sub output features two sine tones that can be blended together to achieve a mix of one octave below, or a fifth above…
CHF 154Sur commande
