Intellijel Zeroscope 1U

CHF 155

The Zeroscope 1U is an adaptation of the excellent 3U Zeroscope by VPME.DE.

Sur commande

Payer facilement avec :

The Zeroscope 1U is an adaptation of the excellent 3U Zeroscope by VPME.DE.

Three Modes Packed Into 1U
Scope — Standard graphical display, with time displayed on the X-axis and voltage displayed on the Y-axis.
X-Y — Alternate graphical display with CH 1 driving the X-axis and CH 2 driving the Y-axis.
Tune — Alphanumerical tuning display, which you can configure to show either Hz values or note names.
The Scope displays have adjustable display offset for each channel and an adjustable trigger threshold, while the tuner has options for reference pitch and average update speed.

Ins & Outs
The inputs are DC coupled and accept signals between -10V and 10V. The Signal on the input is normalled to the output below; this allows you to monitor or tune a signal without a mult or re-patching.

Informations

Quand vais-je recevoir ma commande et à quel prix ?

Livraison en Suisse dès CHF 13.– (avec signature, 1–2 jours)
Besoin plus vite ? Livraison express le lendemain (jour ouvrable) : CHF 25.–
Envoi en Europe sur demande

Comment suivre ma commande

Grâce au numéro de suivi envoyé lors de la confirmation d’expédition 
de la poste Suisse

Produits qui pourraient vous intéresser :

  • Intellijel 1U Quadratt

    Intellijel 1U Quadratt

    Caractéristiques Atténuateur/atténuateur/mixeur actif/tamponné avec signaux externes. Chaque sortie est normalisée pour se mélanger au canal adjacent à droite, ce qui permet de réaliser des sous-mixages par groupes de 2, 3 ou des quatre canaux. 2 modes pour chaque canal (unipolaire et bipolaire). 5v normalisé à chaque entrée.

    CHF 85
    Sur commande
  • Intellijel 1U Stereo Line Out JACKS

    Intellijel 1U Stereo Line Out JACKS

    Panneau de jacks TRS 1/4″ pour le module Stereo Line Out 1U Une autre paire de jacks Si vous ne possédez pas de boîtier Intellijel avec des prises ¼ » compatibles intégrées, vous devez acheter un module Stéréo Out Jacks 1U, qui se connecte via un câble ruban au module Stéréo Line Out 1U pour fournir…

    CHF 24
    Sur commande
  • Intellijel Dual VCA 1U

    Intellijel Dual VCA 1U

    Module VCA compact à 2 canaux courbe caractéristique linéaire convient pour les signaux audio et la tension de commande LEDs pour l’affichage du niveau de la CV Entrée A normalisée sur l’entrée B CV-In A normalisé sur CV-In B Sortie A normalisée sur sortie B (fonction mixer) Doublement de la tension possible via la sortie…

    CHF 105
    Sur commande
  • Intellijel Duatt 1U

    Intellijel Duatt 1U

    Atténuateur à deux canaux, inverseur, multiplicateur, atténuateur, mélangeur et source de tension continue Consommation de courant : 12mA (+12V) / 10mA (-12V) largeur : 14 profondeur : 22 mm

    CHF 78
    Sur commande