Kenton Kenton Modular Solo

MIDI to CV interface

CHF 249.00

Sur commande
Kenton Kenton Modular Solo
Kenton Kenton Modular Solo

CHF 249.00

UGS : Kenton_modularSOLO Catégorie : Étiquettes : , , Marque :

Description

the Modular Solo is supplied complete with ribbon cable ready to fit into any Eurorack (A100) format modular system. Power is supplied by the power supply in the modular case via the backplane Power consumption 12V supply 85mA max / _12V supply 3mA 5v supply is not required (needs /_12V only) CV & Gate signals can be sent via the ribbon cable to the system bus – selected using jumpers MIDI In & Out on DIN sockets (MIDI Out can be switched to give DIN Sync 24 instead) Analogue output CV on 3.5mm mono jack (V/oct or Hz/V or 1.2V/oct) Gate on 3.5mm mono jack (Gate or S-trig with or without pullups) Aux1,2,3,4 on 3.5mm mono jack (all continuously variable) 2x independent clock outs on 3.5mm mono jack Weight 170g Dimensions 128mm high (3U) x 50mm wide (10HP) x 80mm deep D to A conversion for main CV 16 bit high quality / low drift DAC Non-volatile memory EEPROM (no back-up battery required) Processor 32 bit ARM processor 85 mA 12V 3 mA -12V 0 mA 5V 80 mm Depth